Provision ISR BX-380IP Manual do Utilizador descarregar pdf (Página 22)

IP Camera User Manual-17

2. Move the "Sensitivity" scroll bar to setup the motion trace sensitivity.

3. Check the "Add”, press the "Ctrl" button and move mouse to select the motion detection

area; Select “Erase” and move the mouse to clear all motion detection area.

4. Press the "Save" button to save the settings.

5.4.2 Motion Detection Trigger

1. Enter into “Alarm Configuration" "Motion Detection Trigger" to display a interface as

below:

2. Check "Enable alarm" check box. Then motion based alarm is activated.

3. Set alarm holding time.

4. Set alarm trigger options.

Alarm Out: If selected, this would trigger the external relay output on detecting a motion

based alarm.

Trigger Snap: If selected, the system will snap images on an alarm and save them in SD card.

Trigger Email: If the email and attach picture checkbox is checked (Email address shall be

set first in the Mail config interface), the triggered snap pictures and event will be sent into

those address.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 57 58

Sem comentários

Provision ISR BX-380IP Manual do Utilizador Página 22